You don’t need to keep your split air conditioner running all day for heating. If you’re in the room most of the time, keeping it at a steady, comfortable temperature can work. But if the room will be empty for hours, turning the setting down or switching the unit off could save electricity.
The cheapest schedule depends on how fast your room loses heat, how long it’s empty and how well your AC warms it again. Try a practical routine, then compare your electricity use and comfort.
Why do people leave heat pumps running?
When set to heating, a reversible split AC works as an air-to-air heat pump. Many models lower their output once the room reaches your chosen temperature. This helps keep the room warm without always running at full power.
That’s why some advice suggests leaving a heat pump on for long periods. Energy Saving Trust recommends setting a lower temperature when you’re out or asleep, instead of letting your home get cold and then reheating it. A setback just means choosing a lower temperature for a while.
However, much of this advice concerns heat pumps that warm a whole home through radiators or underfloor heating. A wall-mounted split heats the air in its room directly. It may respond differently, so leaving it on all day isn’t always the best choice for every split AC or every room.
What should you do if you are out for a few hours?
If you’re leaving the room for a short time and will be back soon, try lowering the setting by a few degrees. For example, if 20°C is comfortable when you’re home, set it lower while you’re out and schedule the room to warm before you return.
See how your room responds. If it stays fairly warm, your AC may need little time to get back to 20°C. If it cools down quickly, you might need to start heating earlier or lower the setting less. Many systems have timers or weekly schedules, so check your manual to see what yours can do.
Keeping a steady temperature can be convenient if someone is home all day. However, the unit must keep replacing heat that escapes through walls, windows and the roof. A constant setting isn’t automatically the cheapest option.
What if the room is empty all day?
If no one needs the room warm until evening, you don’t have to keep it at your usual temperature all day. Try setting it lower or switching the AC off, then schedule it to start before you need the room.
The best option depends on your home. A well-insulated room may stay warm for hours after the AC turns off. A draughty room might cool down quickly and take longer to warm again. Some air-to-air systems let you schedule different settings for times when you’re home or away; Daikin describes these controls in its air-to-air guide. Check the features of your own model.
If you use this AC as part of your main heating, think about other rooms too. One indoor unit won’t reliably keep several closed rooms warm. Don’t let rooms get so cold that damp becomes a problem, and consider the needs of anyone staying at home.
Should you leave the heating on overnight?
Heat the bedroom according to whether someone is sleeping there. You may not need to keep an empty living room at its daytime temperature overnight. If your split unit heats your bedroom, try a lower, comfortable setting or use its sleep schedule. Then check how the room feels in the morning.
Don’t assume “sleep mode” works the same way on every model. It might change the target temperature, fan speed or noise level. Check your manual, and direct the airflow away from the bed if a draught bothers you.
Health needs matter more than finding the lowest possible setting. NHS guidance advises keeping rooms you regularly use comfortably warm and at least 18°C if possible, particularly for older people and those with certain health conditions. Check the temperature where someone sleeps, rather than relying only on the number shown on the remote.
Does switching the AC on and off waste electricity?
Turning on the AC uses electricity, but you don’t have to keep heating an empty room just to avoid a restart. When the system is off or set lower, the room generally loses less heat than it would if you kept it warmer. When you heat it again, though, the unit may have to work harder for a while.
The balance depends on your system and the weather. Energy Saving Trust’s installer guidance says a short absence often doesn’t justify switching off a whole-home heat pump. A single-room split may need a different schedule, especially when the room will be empty for much longer.
Also, don’t turn the remote up to a very high temperature to try to “catch up”. Choose the temperature you want and allow the room time to warm. If your model has a boost feature, follow its manual.
What changes the best schedule?
Your room and daily routine matter as much as the AC itself. Consider:
- Insulation and draughts: A room that holds warmth gives you more flexibility to turn the setting down.
- Time away: Being out for an hour is different from leaving the room empty all day.
- Outdoor weather: Your system’s heating output and efficiency can change when it’s cold outside.
- Other heating: A radiator or another unit may already be warming part of the space.
- Your tariff: If you have a time-of-use electricity tariff, some hours may cost less than others.
- Comfort: A cheaper schedule won’t help if the room is cold when you need it to be warm.
Our guide Does Air Conditioning Use More Electricity in Cold Weather? explains why winter conditions affect consumption. For help choosing a comfortable target temperature, see Best AC Temperature for Heating in Winter.
How can you find the cheapest schedule for your room?
Begin with a simple routine: keep the room comfortable while you’re there, lower the setting for a short absence, and try switching it off if you’ll be gone longer. Test each approach over a few days. Note the outdoor temperature, how long you use the AC, the room temperature and your electricity meter readings.
Your electricity meter tracks all your appliances, so it won’t show exactly how much the AC uses. Built-in energy monitoring may help if your model provides it. Compare days with similar weather and keep the room equally comfortable. Otherwise, the cheaper day might simply have been warmer outside.
There’s no guaranteed saving from leaving a split AC on or switching it off. What matters is finding a schedule that keeps your room warm when you need it at a cost you can see on your bill. CostToCool’s free calculators currently estimate cooling costs, not winter heating bills, so use your meter and electricity rate for this comparison.
